How Screw Piles are Revolutionising the Construction Industry?

 

Things to consider before using screw pile design

Screw pile installation doesn’t have to be stressful, it can be easily done smoothly by considering the right factors. Piles of screws are rolled into the ground, just like screws rolled over wood.

This is an efficient installation medium, together with its charge dispersion mechanism, which can provide effective underground performance in a variety of soils, including seismic zones with liquefaction potential. Obviously, the soil situation varies from place to place and it’s better to get the location invested if you are planning to build a house on screw piles.

Generally, the life of a screw pile is about 75 years depending upon the average condition of the soil. There are a variety of options available in the Screw Pile Design, it is important to choose the suitable option for safe construction.

Keep on reading the blog to know about the things to consider before going through Screw Pile Installation!

1) Weight of the structure

The weight of the frame will determine the size and length of the screw pile you need. Obviously, compared to a large summer house that includes a gymnasium like this, a small light shed for gardening tools will have different requirements.

2) Distance between screw pile design

Generally, screw piles are installed at a distance of 2 meters, but it varies from soil condition and place. Take advice from experts to install the screw pile at the proper distance. It’s important to install the screw pile with the perfect distance and space for a safer construction project.

3) Point break resistance in the soil

You should consider the type of soil you will be using, as this will determine the size and length of the pile required. For example, clay and chalk will produce different loading capacities for threaded piles and may require significantly different pile specifications. In short, if you tighten in loose soil conditions, you will have to dig deeper compared to hard soil conditions.

4) Will my construction catch wind pressure?

For large gardens or greenhouses, you should not only consider the vertical load that falls on the piles, but also the possibility of horizontal forces on the piles. The higher they are off the ground, the greater the risk that the wind will blow them to one side. In this case, it is worth considering the lateral loads and taking additional measures in terms of pile depth.

5) Know about upward-moving forces

This is relevant to you when calculating wind pressure under ground-mounted solar panel installations or under tents. The weight of your frame is not that important here. Upwind pressure may be your biggest challenge.

Winding-up:

hope you enjoyed reading the screw pile design article, keep the above points in mind for safe construction, and don’t forget to get your soil inspected by the experts before the Screw Pile Installation. Little factors affect a lot in the screw pile design and construction project.

 Share your ideas and innovative advice for choosing the right screw pile designs for the safe installation.