How to repair damaged concrete with screw piles?

Many cracks in concrete can be tricky repairs; after all, water and dirty weather can cause them. Luckily, new technologies are making these repairs easier than ever. One such invention is the screw pile.

What are screw piles?

Screw piles are screw-shaped, metal spikes in concrete that are designed to puncture the large cracks that can be seen when the concrete is broken. When someone has cracked a slab of drywall, these pieces should ideally be replaced with screw piles before being used for any building or renovation project.

Uses of screw piles

Curing concrete is a common way to repair cement. The process involves removing a section of the old surface, dumping out the existing concrete and cement, and injecting a new mix in its place. Once this process is finished, follow up with masonry or specialty concretes.

Facts about screw piles

Screw piles are deep and large excavation pits made with wood screws. This type of construction is extremely strong, causing the need for less concrete than other methods. The screw piles are not visible because they are below ground level and this means that there is no sign of a repair being on the ground, which can make it easier to pass inspection and avoid fines.

Save time running around finding cracks in the floor by visiting your local contractor who has access to screw piles. Complying with the rules and regulations concerning loose ends on any type of construction project is tedious, frustrating, and time-consuming. These are mainly hard to track down as we lose thousands throughout the course of a day. With loose ends solving construction problems in the industry there is no need for any contractor to get fined for not having any loose ends allowed based on findings done in inspections.

When to use a screw pile?

Screw piles are often used in place of spot welds. They will follow the contour of a concrete slab and eliminate the need for welding. Before using a screw pile it is necessary to give it time to bond with the concrete. Once this has happened it can be excavated and installed by hand using a screwdriver. The actual construction company rushes through the process with all the materials provided by the contractor screwed together, giving them roughly ten seconds before dumping filler, smoothing down and spraying with finish coatings.

Using screw piles for small cracks

Sometimes a football will hit the side of your car or bat while swinging and it will break or crack your concrete. If you have a homeowner insurance policy that protects against this, it will cover repairs if the damage is your fault. In the event that you don't have home insurance protecting against this claim, you can hire professionals to put screw piles into small cracks. This helps new hairline cracks form so they eventually become larger holes with the easier overall repair.

Conclusion

A screw pile is a pre-cast wall composed of conical pile sections. They are used to repair or replace cracked concrete as well as create opportunities for additional support or paving. Hence the above are the tips to repair damaged concrete with screwed piles